WaterGiene
ATP Water Test
The WaterGiene is a simple 20-second test with enhanced sensitivity measuring total ATP in water and on wet surfaces. Suitable for CIP systems, purified water systems, cooling water, clean rooms, surgical instruments, fermentation/tablet press equipment and rinse water. Can swirl in a water sample or swab a surface.
Enhanced ATP sensitivity to microbes using vacuum filtration for fast remediation. Recyclable components, patented thread design, pre-moistened swab with biofilm-breaking tip and metal-detectable foil seal. Compatible with novaLUM II-X via dedicated H2OG channel.
WaterGiene — opened test
Performing the WaterGiene ATP water test with the novaLUM® II-X
Step-by-step test procedure — WaterGiene
Follow the steps for preparation, sampling, activation and measurement.
- Prepare
Open PLANS
Tap PLANS on the novaLUM II-X home screen.
- Prepare
Choose sampling plans
Select PLANS again to open the list of saved sampling plans.
- Prepare
Start the correct plan
Select RUN next to the sampling plan for this test.
- Prepare
Select the sampling location
Use the left/right arrows or list view to select the correct location. Check the WG screen code. Enter operator details if required.
- At the sampling location
Withdraw the swab at the sampling location
Move the test to the sampling location with the holder closed. Only there, immediately before sampling, gently withdraw the swab with a slight twisting motion. Do not touch the swab tip.
- Sample
Take the water sample
Dip the WaterGiene swab into the liquid for 5 seconds until fully saturated.
- Activate
Reinsert and activate
Reinsert the swab and twist the handle fully down. Gently shake sideways 3 times.
- Activate
Shake the test again
Unscrew the handle completely. Hold the handle and shake the WaterGiene test 3 times so liquid is forced into the microtube. Twist the handle fully down again.
- Activate
Remove the black microcap
Remove the black microcap only after activation, immediately before inserting the test into the novaLUM II-X. Check that the white tablet has broken apart.
- Measure & assess
Insert the test and measure
Insert the WaterGiene fully into the measurement chamber. Hold the novaLUM II-X upright and press the Run Test icon to start the measurement.
- Measure & assessExample screen
Read the result
This manufacturer procedure specifies 20 seconds. Assess PASS/FAIL against your configured limit. The screen shown displays an example result.
Technical specifications of the WaterGiene ATP water test
Advantages of ATP measurement in water compared to microbiological culture
Sensitivity Data
Bacteria studied: E. coli, Pseudomonas, Citrobacter, and Enterobacter. Divide by 25 to convert to approximate surface concentration (cfu/100 cm²).
Applications: ATP measurement in process water, drinking water and cooling water
WaterGiene order codes and packaging options
See Operator's Manual for additional kits and order codes.
Ready to optimise your hygiene?
Request a free demo or receive a custom quote for your production environment.